This fountain has a beautiful, striking fountain pattern that also provides aeration for your pond or lake. The nozzle combines a lower tier crown with the vertical geyser through its center. Available in different motors versions;
Crown & Geyser Fountain Specifications | ||||||
---|---|---|---|---|---|---|
Motor Size | 1hp | 2hp | 3 & 3.5hp | 5hp | 7.5hp | 10hp |
Spray Height (m) | Upper 3.5 Lower 1.7 | Upper 4.3 Lower 1.7 | Upper 5.2 Lower 2.1 | Upper 6.7 Lower 3.1 | Upper 8.2 Lower 2.7 | Upper 10.4 Lower 3.0 |
Spray Dia. (m) | Upper 0.6 Lower 9.1 | Upper 0.6 Lower 10.6 | Upper 0.6 Lower 9.7 | Upper 0.6 Lower 15.2 | Upper 0.6 Lower 15.8 | Upper 0.6 Lower 16.5 |
Volt / Phase / Amp | 230 / 1 / 8 400 / 3 / 2.6 | 230 / 1 / 10.5 400 / 3 / 3.7 | 400 / 3 / 5 | 400 / 3 / 8 | 400 / 3 / 12 | 400 / 3 / 18 |
We offer a specialist installation service for all our fountain equipment, this includes full cabling, control panel installation and setup of the fountain in your chosen waterbody. There are two main ways to install these units using the following two techniques shown below;
![]() |
![]() |
We can supply Aquamaster's fountains and our installation services to both domestic and commercial clients throughout the United Kingdom. For more information and advice about any of our fountain or aeration products or lake construction, lake maintenance, lake design, water management or fishery and consultancy services, please email [email protected] or call 0800 3891990.